2.3.2Date & Time
This section tells you how to setup IP device’s date and time settings.
STEP 1: Click the [Date & Time] on the “Main Setup page”. The “Date setting page” is displayed as below
STEP 2: Configure these settings with reference to the table below. If you are still unsure what to set, contact your system administrator.
Date Setting
Parameters | Description | |
| Click this to enable IP device’s SNTP/NTP function. This enables | |
| this IP device to synchronize its time settings with a SNTP/NTP | |
| server. You can use this function to make sure all your IP devices’ | |
SNTP/NTP | time is the same. Additionally, with our embedded | |
server | ||
accurately. | ||
| ||
| IP address: Enter the IP address of the SNTP/NTP server. | |
| Sync time: Select the time interval for this IP device to | |
| synchronize its time. | |
Set | Click this to manually setup the date & time. | |
|
| |
|
