Day/Night (CMOS Non-D/N Models)
This tab concerns the day and night switch timing for your camera. Please refer to the table below.
Parameters | Description | |
|
| |
Switch from Day | This value controls the level of light where camera | |
mode to Night | switches into night mode. Increasing it will make | |
camera switch to night mode at a darker illumination | ||
mode | ||
level. | ||
| ||
| The camera will only switch day/night status if the | |
Switch if lasts | illumination level stays either above or below the | |
more than X | boundary for this much time. This is to prevent a | |
seconds | temporary brightness change from triggering unnecessary | |
| day/night changes. | |
Brightness Meter | This bar shows the illumination level at which cameras go | |
|
|
