Speco Technologies SIPMPDVFH, SIPMPBVFH instruction manual Parameters

Models: SIPMPDVFH SIPMPBVFH

1 64
Download 64 pages 1.26 Kb
Page 48
Image 48
Manual background

[Stream 2] item to display the content page, Contents for both stream are identical. Refer

to the table below for how to configure each setting.

Parameters

Description

Encoder Type

Select the encoder’s compression type.

 

MPEG-4 / MJPEG / H.264

Resolution

Select the video resolution of the IP device.

Frame rate

Select the available frame rate from the drop down menu.

 

Select the video bit rate mode.

 

Constant Bit Rate: The bit rate remains constant at all

Video Bit

conditions.

Rate Mode

Variable Bit Rate: The video bit rate will vary based upon

 

 

scene complexity and amount of movement. The quality will

 

remain the same.

 

When encoder type is MPEG4 or H.264, and video bitrate mode

Quality

is “Variable Bit Rate” Select the quality value from High /

 

Medium / Low

 

When encoder type is MPEG4 or H.264. and video bitrate mode

 

is “Variable Bit Rate”. Select the Interval between two I-frames.

GOP Length

This is also called GOP Length. (Group of Picture) . Default

 

value is one I frame per second. The maximum length of GOP is

 

limited to 60.

 

Select the available frame rate from the drop down menu.

 

This puts a hard cap on the maximum bit rate allowed in any

Frame rate

given second of video streaming. Assigning a limited bit rate

may result in a few dropped frames rate when the stream data

 

 

overflows the allowed bit rate. Doing so will also disable Bit

 

Rate setting below.

 

Select the video bit rate mode.

 

Constant Bit Rate: The video bit rate remains constant at all

Video Bit

conditions.

Rate Mode

Variable Bit Rate: The video bit rate will vary based upon scene

 

complexity and amount of movement. The quality will remain

 

the same.

 

This puts a hard cap on the maximum bit rate allowed in any

Video Max

given second of video streaming. Assigning a limited bit rate

may result in a few dropped frames rate when the stream data

Bitrate

overflows the allowed bit rate. Doing so will also disable Bit

 

 

Rate setting below.

 

This is the target bitrate that the camera will attempt to provide

Video Bitrate

when using Constant Bitrate mode. The actual value will

 

fluctuate slightly based on scene changes.

Frame rate

Select the frame rate for each profile by choosing from the drop

 

 

2-44

Page 48
Image 48
Speco Technologies SIPMPDVFH, SIPMPBVFH instruction manual Parameters