| Select exposure mode to auto or manual. | ||||
| 1. Auto: The IP camera will adjust the | ||||
Exposure Mode |
| exposure automatically. |
| ||
|
|
|
| ||
| Manual: Manually select | the | Exposure Gain | ||
| and | Shutter Speed below.. |
| ||
| Select the white balance mode. After you set the | ||||
| parameter, you need to wait for 5~10seconds to | ||||
| see the final result. |
|
| ||
| 1. | AUTO : Auto white balance (default) | |||
| 2. | INDOOR1: Select the indoor white | |||
|
| balance profile 1. |
|
| |
| 3. | INDOOR2: Select the indoor white | |||
|
| balance profile 2. |
|
| |
| 4. | OUTDOOR1: Select the outdoor white | |||
|
| balance profile 1. |
|
| |
White Balance | 5. | OUTDOOR2: Select the outdoor white | |||
(In |
| balance profile 2 |
|
| |
6. | HOLD: Select this to let the IP camera | ||||
| |||||
Indoor/Outdoor/Auto/Hold |
| automatically obtain a best white balance | |||
profiles only) |
| setting according to current environment. | |||
|
| The IP camera will use this setting to | |||
|
| adjust color. |
|
| |
|
| NOTE: This setting will be lost after you | |||
|
| reboot the camera. | |||
| For all the settings above, you will need to | ||||
| setup the value for | AE Reference Target | |||
| and Maximum auto shutter speed. |
7.MANUAL: Select this to enable manual setting of the white balance. You will need to enter the
|
| R Gain and | B Gain setting below. | |
AE Reference Target | This is the desired image brightness output level. | |||
|
| The camera will attempt to change the exposure | ||
|
| levels or digital amplification levels to achieve this | ||
|
| level of brightness. Increasing this may provide a | ||
|
| brighter image, but if there are extremely dark | ||
|
| areas, this may also create slightly more noise in | ||
|
| the underexposed areas. |
|
|
Maximum auto shutter | The maximum allowed time for the camera to take | |||
speed |
| a single image. |
|
|
Click the | [Apply] button to confirm the settings or click the | [Reset] button to |