2.3.4IP Settings
Connection Type
Click the [Connection Type] item to display the “Connection Type Page”. Refer to the
table below for how to configure each setting.
| Parameters | Description |
|
| Click this to enable IP device’s DHCP function. |
| Dynamic IP | It will acquire its WAN port IP address from a DHCP server |
| address | within the same network. (You must have a DHCP server in |
| order to enable this function.) | |
|
| |
|
| Click this to manually enter the IP address. |
|
| IP address: Enter the WAN port IP address. |
| Static IP | Subnet mask: Enter the subnet mask of WAN port. If IP |
| address is changed, adjust the subnet mask | |
|
| |
| address | accordingly. |
|
| ISP gateway: Enter the IP address of the gateway (the |
|
| router). |
|
| Click this when you connect IP device directly to the xDSL |
|
| modem. |
| PPPoE | User name: Enter the user name of your xDSL account. |
| Password: Enter the password of your xDSL account. | |
|
| |
|
| Note: You have to click the [Save Reboot] after you click the |
|
| [Apply button] to let this IP device start xDSL connections. |
| ||
