Speco Technologies SIPMPDVFH, SIPMPBVFH instruction manual Select exposure mode to auto or manual

				Select exposure mode to auto or manual.
				1. Auto: The IP camera will adjust the
					exposure automatically.
	Exposure Mode			2.	Manual:	Manually	select the	Exposure
					Gain and	Shutter Speed below. Day and
					night mode change will not operate as normal
					under manual Exposure.
				Select the white balance mode. After you set the
				parameter, you need to wait for 5~10seconds to
				see the final result.
				1.	AUTO : Auto white balance (default)
				2.	INDOOR1: Select the indoor white
					balance profile 1.
				3.	INDOOR2: Select the indoor white
					balance profile 2.
				4.	OUTDOOR1: Select the outdoor white
					balance profile 1.
	White Balance			5.	OUTDOOR2: Select the outdoor white
					balance profile 2
				6.	HOLD: Select this to let the IP camera
					automatically obtain a best white balance
					setting according to current environment.
					The IP camera will use this setting to
					adjust color.
					NOTE: This setting will be lost after you
						reboot the camera.
				7.	MANUAL: Select this to enable manual setting
					of the white balance. You will need to enter the
					R Gain and		B Gain setting below.
	R Gain			Add or decrease redness to the video when under
	(Manual	White	balance	Manual White Balance mode. (This function is
	mode only)			only available in Manual White balance mode.)
	B Gain			Add or decrease blueness to the video when under
	(Manual	White	balance	Manual White Balance mode. (This function is
	mode only)			only available in Manual White balance mode.)
	Exposure Gain (In Manual			Select the exposure Gain of the IP camera. The
	Exposure Mode only)			higher the value = brighter images. (1 ~ 255)
	Shutter Speed			Increase or decrease the shutter speed. The closer
	(In manually shutter mode			the number is to 1, the better nighttime
	only)			performance is, although this also causes motion
				blur to the video.
2-46