Spectra Logic Spectra 12000 manual Adding Drives, Tap Drives, 2 The Drive Configuration screen

144 Spectra 12000 User Guide

Adding Drives

The Spectra 12000 library readily accepts additional drives up to a maximum of eight drives. Although robotic operations are disabled when the front door is open, the library continues operation while you add or remove a drive. No tools are required.

1.In the Library Controller, select the General Toolbar.

2.Tap Drives.

Figure 11-2The Drive Configuration screen.

3.Select the drive slot where you want to add the drive by tapping on the bar for that drive.

4.Tap Add.

5.A Confirm Selection window pops up asking Okay to add drive? Tap

OK.

Note: When you do this, the solenoid latches on the door should open automatically.

6.A window pops up with the message Open Door and Add Drive. Close and latch door. Tap Ok when complete.