10. FADER
Linear faders are pr ovided for precise and sm ooth level
control for each Stereo section.
GROUP SECTION
1. RETURN
A mono Return is prov ided to each outp ut Grou p, wh ich is
intended for use as a sub-mix from another d esk or as an
effects inp ut. The inp ut is electron ically balanced on a
standard
1⁄4" 3-pole ‘A’ gau ge jack.
2. IN SERT
An Insert is provided for each outp u t Group to allow external
processing equipment to be ‘inserted’ into the outpu t path.
The 1⁄4" 3-pole ‘A’ gauge jacks are bypassed except when a
plug is inserted.
3. RETURN LEVEL
The level of the signal at the RETURN inp u t (1, abov e ) is s et
by a rotary control. A panel marking indicates the nominal
unity gain position.
4. PAN
The Gr ou p PAN control determines the position of the signal
within the stereo image which is routed to the mix L/R bu sses
when L-R is pressed. Rotation fully anticlockwise feeds the
signal solely to the Left mix buss, while rotation clockwise
sweeps the image to the right.
5. PFL
When the PFL switch is pressed, the pr e-fade Grou p signal is
fed to the headph ones and RIGHT/PFL METER where it
replaces the mix signal. The AFL/P FL LED on th e master
section illuminates to warn that the headp hones and m eter
are now respond ing to the AFL/ PFL selection and the PFL
LED on th e Group lights to identify the active Group.
6. GROUP FADER
Long throw faders are p rovid ed for each Gr oup w ith un ity
gain at the top of their travel.

GROUP

Pag e 17