Belt/Deck Lubrication Procedure

Do not lubricate with other than Spirit Fitness approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Spirit Fitness or your authorized Spirit Fitness

dealer.

Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your treadmill. If the lubricant dries out, the friction between the belt and deck rises and places undue stress on the drive motor, drive belt and electronic motor control board, which could result in catastrophic failure of these expensive components. Failure to lubricate the deck at regular intervals may void the warranty.

The belt & deck come pre-lubricated and subsequent lubrication should be performed every 180 hours of use.The console has a built in lubrication reminder indicator that lights every 180 hours of use.

Use the lubricant to lubricate the deck beneath the belt. If you can reach under the belt approximately 6” on each side, use the following procedure: Unplug the electrical cord. At the middle of the deck, lift up on the belt and reach under with the tube of lubricant. Squirt most of the lubricant on the deck surface. Repeat the process on the opposite side. Plug the electrical cord back into the outlet and walk on the belt at a moderate speed for five minutes.

If unable to perform the above procedure, it will be necessary to loosen the walking belt. Using the 6

mmAllen wrench supplied, loosen the two rear roller adjustment bolts -- located in the rear end caps – enough to get your hand under the belt (5 –10 turns). Make sure to loosen both bolts the same amount of turns and also remember how many turns, because when finished you will need to tighten the bolts back to the point they were before.

Once the belt is loose, wipe the deck with a clean lint free cloth to remove any dirt. Apply the whole tube of lubricant onto the deck surface about 18 inches from the motor cover. Squeeze out the contents of the tube across the deck (parallel to the motor cover) in about a one-foot line, like toothpaste on a toothbrush.The one-foot line should be in the middle of the deck at approximately equal distance from both side edges of the belt.You want the lubricant to be applied about the spot that your feet would hit the belt as you are walking.This should be about 18 inches from the motor cover, but you may want to walk on the treadmill before loosening the belt to note where your feet land on the belt. If you mostly use the treadmill for running, the spot where your feet land may be different from walking.

Once the lubricant is applied, tighten the rear roller bolts the same amount of turns as when you loosened them. Run the treadmill at about 3 mph without walking on it for about a minute or two to make sure the belt stays in the middle of the deck. If the belt tracks to one side then follow the belt tracking instructions to remedy. Now the deck is lubricated and you should walk, not run, on the treadmill immediately for at least 5 minutes to ensure the lubricant is evenly distributed.

XT685 Treadmill

30

Page 33 Page 35
Page 34
Image 34
Spirit XT685 owner manual Belt/Deck Lubrication Procedure
Page 33 Page 35

XT685 specifications

The Spirit XT685 is a highly-regarded treadmill designed for both casual and serious fitness enthusiasts. Known for its robust construction and innovative features, it stands out in the crowded market of home exercise equipment.

At the heart of the XT685 is its powerful 3.0 HP continuous-duty motor, delivering smooth and consistent performance whether you're walking, jogging, or running. This motor supports a top speed of 12 mph, catering to users at all fitness levels. Additionally, the treadmill offers an impressive incline range of 0 to 15%, allowing users to simulate hill workouts which enhance calorie burning and build lower body strength.

The running surface measures 20 inches by 60 inches, providing ample space for comfortable movement. The XT685 is equipped with a cushioned deck that significantly reduces impact on joints, making it ideal for users concerned about injury. This feature, combined with a high weight capacity of 350 pounds, ensures a sturdy and accommodating experience for a wide array of users.

One of the standout features of the XT685 is its advanced console. The multi-color LED display is user-friendly, and offers vital feedback on time, distance, speed, calories burned, and heart rate. The integrated heart rate monitoring is facilitated through the handgrip sensors, allowing users to optimize their workouts based on their heart rate zones.

The treadmill comes with 10 pre-set workout programs designed by fitness professionals, providing variety and motivation to keep users engaged. Whether you’re looking for interval training, endurance builds, or weight loss, there’s a program tailored to meet your goals.

The Spirit XT685 also incorporates modern technology with its Bluetooth connectivity, enabling users to sync their workouts with fitness apps. This feature allows for better tracking of progress and personalization of workout plans. Additionally, the built-in speakers and USB charging port add convenience for users looking to enjoy their favorite music or podcasts while exercising.

In conclusion, the Spirit XT685 treadmill combines power, comfort, and technology, making it a strong contender for home fitness equipment. With its durable construction, advanced features, and user-centric design, it accommodates a variety of fitness enthusiasts, helping them to achieve their health and wellness goals effectively. Whether you're a beginner or an experienced athlete, the XT685 offers the quality and reliability that can elevate your workout routines.
Top Page Image Contents