Sprint Nextel 402 manual Installing the Software and Activating Your Device

Section 2B

Installing the Software and Activating Your Device

♦Installing the Software on a Windows Computer (page 7)

♦Installing the Software on a Mac Computer (page 13)

♦Activating Your AirCard 402 Device (page 16)

The installation process has two stages:

⬤Installing the Software and Drivers — Insert the device to install the drivers and the software (for Windows, see below; for Mac, see page 13).

⬤Activating Your Device — Start the software. Sprint's hands-free activation feature will automatically begin activating your device on the network (page 16).

For information on using the AirCard 402 device on Linux, please see www.sierrawireless.com/support.

Installing the Software on a Windows Computer

System Requirements

The AirCard 402 device works with:

⬤Windows Vista.

⬤Windows XP with Service Pack 2 or later.

⬤Windows 2000 with Service Pack 4.

Installing the Software

Section 2B. Installing the Software and Activating Your Device 7