Setting Up Your Bluetooth

You need to connect your phone to your Bluetooth headset before you can begin using it. To do this, you need to:

Enter the name your phone uses for Bluetooth communication.

Set your phone to be discovered by other Bluetooth devices.

View your phone’s Bluetooth address.

Your Phone’s Bluetooth Name

Your phone’s Bluetooth name will be seen by other in-range Bluetooth devices, depending on your Visibility settings. Your phone comes with a default Bluetooth name. You can change this to make it easy for others to find you.

To change the default Bluetooth name:

1.Select M> Bluetooth > Setup.

2.Highlight the Name field and then press M.

3.Use your keypad to enter a new name and then press M.

Find Me

By enabling Find Me, you make your phone visible (or discoverable) to other Bluetooth equipped devices.

To enable Find Me and make your phone visible to other Bluetooth devices:

Select M> Bluetooth > Find Me.

Your phone makes itself visible to other Bluetooth devices for 3 minutes.

152 Section 2L: Using Bluetooth

Page 168
Image 168
Sprint Nextel K1M Setting Up Your Bluetooth, Your Phone’s Bluetooth Name, Find Me, To change the default Bluetooth name