SRS Labs SR850 manual LIA Status Byte, Input/Resrv

Remote Programming

LIA STATUS BYTE	bit	name	usage
	0	INPUT/RESRV	Set when an INPUT or RESRV overload is
			detected.
	1	FILTR	Set when a FILTR overload is detected.
	2	OUTPT	Set when an OUTPT overload is detected.
	3	UNLK	Set when a reference unlock is detected.
	4	RANGE	Set when the detection frequency switches
			ranges (harmonic x ref. frequency decreases
			below 199.21 Hz or increases above
			203.12 Hz). Time constants above 30 s and
			Synchronous filtering are turned off in the upper
			frequency range.
	5	TC	Set when the time constant is changed indirect-
			ly, either by changing frequency range, dynamic
			reserve or filter slope.
	6	TRIG	Set when unit is triggered. Only if samples or
			scans are triggered.
	7	PLOT	Set when a plot is completed.

The LIA Status bits stay set until cleared by reading or by the ❊CLS command.

ERROR STATUS BYTE	bit	name	usage
	0	Prn/Plt Error	Set when an error occurs during printing or
			plotting.
	1	Backup Error	Set at power up when the battery backup has
			failed.
	2	RAM Error	Set when the RAM Memory test finds an error.
	3	Disk Error	Set when an error occurs during a disk or file
			operation.
	4	ROM Error	Set when the ROM Memory test finds an error.
	5	GPIB Error	Set when GPIB fast data transfer mode aborted.
	6	DSP Error	Set when the DSP test finds an error.
	7	Math Error	Set when an internal math error occurs.

The Error Status bits stay set until cleared by reading or by the ❊CLS command.

6-32