STORAGE
1.To store the BioFLEX 2200, simply keep it in a clean dry place.
2.To move the BioFLEX 2200, hold the upright of the BioFLEX 2200 while you tip it backward. When the WHEELS(32) come in contact with the floor you can easily roll the BioFLEX 2200.
MAINTENANCE
The safety and integrity designed into the BioFLEX 2200 can only be maintained when the BioFLEX
2200 is regularly examined for damage and wear. Special attention should be given to the following:
1.Verify that the WARNING LABEL(72) and LAT BAR WARNING LABEL(73) are in place and easy to read. Call Stamina Products immediately at
2.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3.Worn or damaged components shall be replaced immediately or the BioFLEX 2200 removed from service until repair is made.
4.Verify that the Cables are properly installed on all Pulleys.
5.Check the condition of the Cables. Replace the Cables if the plastic coatings are cracked or broken.
6.Check the Tension Cords for wear. Replace Tension Cords that are frayed or worn.
7.Check the plastic hooks on the both ends of all Tension Cords. Replace Tension Cords with deformed or damaged hooks.
8.Check the pulleys for excessive wear. Replace worn pulleys.
9.Only Stamina Products supplied components shall be used to maintain/repair the BioFLEX 2200.
10. Keep your BioFLEX 2200 clean by wiping it off with an absorbent cloth after use.
23
