Star Micronics HA15 80825072, LC-1521 Adjusting the dot alignment, To select a setting box

Adjusting the dot alignment 43

To select a setting box

❏Click on the box you want to select or move to by using your keyboard’s Tab or arrow keys. The currently selected setting box is highlighted on the screen.

To change a setting

❏After you select a setting box, click on the box or press Enter to pull down a list of available settings.

❏Select the setting you want to use in the list by double-clicking on it, or by moving to it with the arrow keys and pressing Enter.

Note:

An asterisk to the right of a setting indicates that it is the default.

The settings in the General, Font, and Paper windows are identical to those in the EDS Mode. See “EDS Mode Settings” on page 31 for details.

Adjusting the dot alignment

❏Click on Adjust or press the F7 function key.

			Adjust
Multi-Part Mode
Normal Mode		*
DRAFT				Normal-Density
0	*			0	*
D-Density/Speed				Plotter-Graphics
0	*			0	*
D-Density P-Graphics				CRT Graphics I
0	*			0	*
NLQ				CRT Graphics II
0	*			0	*
Quadruple-Density				Double-Density
0	*			0	*
	F9:Test					F10:Test All

❏Use the above window to test and adjust the vertical alignment of the printer in each printing mode. See “Adjusting the dot alignment” on page 72 for full details on dot alignment.