Star Micronics DOT MATRIX PRINTERS, LC-1521, LC-1511, HA15 80825072 Switches 1, 2, 3, 4 Page Length

34Using the EDS Mode

BANK D

Switches 1, 2, 3, 4: Page Length

Turn these switches on or off to form the pattern that matches the Page Length setting you want to use.

Page Length	SW1	SW2	SW3	SW4
11”/Letter	ON	ON	ON	ON
8”	OFF	ON	ON	ON
11.7”/A4	ON	OFF	ON	ON
12”	OFF	OFF	ON	ON
8.5”/Letter	ON	ON	OFF	ON
14”/Legal	OFF	ON	OFF	ON
10.5”/Executive	ON	OFF	OFF	ON
7.25”/Executive	OFF	OFF	OFF	ON
3.5”	ON	ON	ON	OFF
5.5”	OFF	ON	ON	OFF

Switch 5: CR Centering Position

Specifies whether the printer's CR centering is long (ON) or short (OFF). When the CR centering position is long (ON), the carriage moves to the center of the platen before the paper is inserted or ejected. When CR centering is short (OFF), the carriage moves to the left side of the platen.

In order to prevent paper feeding problems, set the CR centering position to short (OFF) when narrow (less than 5.6″￿) paper is used and set it to long (ON) when wider (more than 5.6″￿) paper is used.

BANK E

Switches 1, 2, 3, 4, 5: Code Page/International Character Set

If your EDS settings specify IBM emulation (Bank A, Switch 1 OFF) with either character table (Bank A, Switch 2), or Standard emulation (Bank A, Switch 1 ON) with the graphics character table (Bank A, Switch 2 ON), use the Bank E switches to select the default character code page you want to use.