How to edit

Insert a tape to be recorded into recording VCR.

Slide EDIT on the camcorder to the direction of the arrow.

EDIT ,-=.

Set the POWER switch of the camcorder to PLAYER, then insert the recorded tape.

Play back a tape on the camcorder until you locate the point where you want to start editing, then press II PAUSE to set the camcorder to the playback pause mode.

On the recording VCR, locate the recording starting point and set the

VCR to the recording pause mode.

Press U PAUSE on the camcorder and VCR simultaneously to start editing.

I

Editing more scenes

Repeat steps 4 to 6.

To stop editing momentarily

Press II PAUSE on the recording VCR.

To stop editing

Press [] STOP on both VCRs.

If you use the DATA SCREEN function

The indicators d=splayed on the TV screen will also be recorded. If you don'twant to record these indicators, press DATASCREEN on the Commander.

Using of the EDIT switch

When you set EDIT to the direction of the arrow (EDIT ON), you can keep picture and sound deteriorations resulting from editing to the minimum. Avoid using the edited tape for

multiple generations of editing. After editing, be sure to set this switch in the opposite direction of the arrow (EDIT OFF).

8 Advanced Camera Operation

Page 38
Image 38
Sony CCD-FX310 operation manual To stop editing, If you use the Data Screen function, Using of the Edit switch