You can check the last port_onof a scene you JUSt recorded without changing the setting of
the POWER switch using EDITSEARCH.
1Put the camcorderin the standby mode by
pressingthe START/STOP button. D
8TART ISTOP
2Press the - _side of EDITSEARCH momentarily.
The last few seconds of therecorded portion willbe
playedback intheviewfinder. After a few seconds of
playback, the camcordergoes back to the standby
mode,ready forthenext recording.
Note on using EDITSEARCH
When you raise the viewfinder and use EDITSEARCH,
hold the viewfinderwithyour thumb toprevent
movement.
+ EDITSEARCH --(_
,'_,- " - EDITSEARCH
You can check therecorded picture in the vlewfinder using EDITSEARCH. Sound cannot
bemonitored.
1Pressthe small green button, and slide
thePOWER switchto CAMERA.
Set the STANDBY switch up.
START ISTOP
3Keep pressing the + or - side of EDITSEARCH to
view the playback picture:
+sidefor the playback picture
-side for the playback picture inreverse. + EDITSEARCH - (_
To stop playback
Release EDITSEARCH.
To monitor the sound while viewing the playback picture inthe viewfinder
1 Connect an earphone to the @ (earphone) jack.
2Press the small green button and slide the POWER switch to PLAYER.
3 Press _ to rewind the tape and press 2 where you want to stop.
4 Press D to start playback.
6Advanced Camera Operat=on