Check that the following accessories are supplied with your camcorder

Wireless Remote

Size AA (R6) battery for

Commander (1)

Remote Commander (2)

• Battery pack NP-55 (1)

AC power adaptor AC-V35/V35A (1)

• Shoulder strap (1)

Lithium battery

• RFU adaptor RFU-90UC (1)

CR2025

(1)

 

Change to plus side illus

 

• Lens cap (1) (attached to

• Jack cover (1) (attached to

the camcorder)

the camcorder)

Before you can use your camcorder, you need to:

1Charge and install the battery pack.

2Insert a tape.

3Adjust the viewfinder lens to your eyes.

4Install the lithium battery

5 Set the date and time

This chapter takes you through these procedures step by step

You also need to set the BEEP switch

The BEEP switch is preset to ON: the camcorder will beep when you start and'stop recording and as a warning of unusual conditions (see page 50). These beeps will not be recorded on the tape.

Set the BEEP switch to OFF, to deactivate the beep.

Before You Begin 5

Page 5
Image 5
Sony CCD-FX310 operation manual Wireless Remote, You also need to set the Beep switch