..........III...................

IIthe camcorder _sbrought d_rectly from a cold place to a warm place, moLsture may condense inside the camcorder, on the surface of the tape or on the lens. In this cond_bon, the tape may stick to the head drum and be damaged or the unit may not operate correctly. To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensors.

However, take the following precautions.

If moisture condenses Inside the unit

,.,,i _ .

Moisture is present inside the camcorder when:

The [] indicator in the viewfinder blinks.

When the tape is inserted, the -_ indicator also blinks.

Several beeps sound continuously for five seconds when the BEEP switch is set to ON

and the tape is inserted.

In such cases, no functions except for tape ejection work.

Eject the tape, turn off the camcorder and leave it with the cassette holder open for at least I hour.

The camcorder can be used again if the [] indicator does not appear when the power is turned on again.

If moisture condenses on the surface of the tape

Moisture is present on the surface of the tape when

The ,A indicator blinks inside the viewflnder when the

tape

is inserted and a tape transport button (D, _1_1,

_C

etc.)

is pressed.

,,'T_

Several beeps sound continuously for about five seconds when the BEEP switch is set to ON.

In such cases, no functions except for tape ejection work.

Eject the tape and let the camcorder and the tape sit for at least 1 hour.

The tape can be used again if the - indicator does not appear when the tape is inserted and a tape transport button is pressed.

If moisture condenses on the lens

No caution indicators will appear, but the picture becomes dim.

Turn off the power and don'tuse the camcorder for at least 1 hour.

How to prevent moisture condensation

When bringing the camcorder from a cold place to a warm place, put the camcorder tn a plastic bag and allow =tto adapt to room conditions over a period of time.

1Be sure to tightly seal the plastic bag containing the camcorder.

2Remove the bag when the air temperature inside it has reached the temperature surrounding it (after about one hour).

Add,tlonal Information 39

Page 39
Image 39
Sony CCD-FX310 operation manual If moisture condenses Inside the unit, If moisture condenses on the surface of the tape