By using the Remote Commander, you can be tn the p_cturewith your friends and family. or conveniently control the playback of your tape from a distance.

1

2

Insert two size AA (R6) batteries with the + and - ends properly positioned.

Set the [] REMOTE COMMANDER

switch on the battery mounting surface of the camcorder,

If the battery is attached, remove tt.

Reattach the battery after setting the

REMOTE COMMANDER ON/OFF switch.

3 Set the POWER switch on the camcorder as follows:

--When camerarecording, 1) press the small green button on the POWER switch and slide it to CAMERA, 2) set the STANDBY switch up.

m When playing back, slide the POWER switch to PLAYER.

4 Aim the Commander at the remote

press the appropriate button on sensor on the camcorder and

the Commander.

 

,--_

- Remote sensor

 

_-.f2

m (6.6 ft)

 

(6.6.!

m/16 4

2 m

 

\_.---....,4.

_ --'"_-

__5

°J3

0o

(Approximate maximum distance and angles for remote control)

Note on the Remote Commander

Keep the remote sensor away from strong lightsources such as direct sunhght or illummat_on Remote control with the Commander may not function properly ander such circumstances.

The command mode of the Commander _sVTR2 Avoid using the Sony VCRs with the same command mode at the same time

Getting familiar with some buttons

HOLD switch

When you slide the switch in the direction of the arrow, all the buttons will become inoperable to prevent any misoperation should you

accidentally press the buttons.

I1_ SLOW and DATA SCREEN buttons

You can use the functions of these buttons only with the Commander.

'R._-,,- _ HOLD

--1_ SLOW

. r

DATA SCREEN

Battery life In normal operation, batteries last up to six months. If the camcorder does not

operate properly, the batteries might be exhausted. Replace both batteries with new ones

To avoid damage from possible battery leakage

Remove the batteries when you w_ll not use the Commander for a long time.

When you connect the receiver of a remote control kit

When you connect the receiver of a remote control kit (not supplied) to the REMOTE tt control connector, be sure to set the I1 REMOTE COMMANDER switch on the battery

mounting surface of the camcorder to OFF.

19

Basic Camera Operation

Page 19
Image 19
Sony CCD-FX310 operation manual Set the Power switch on the camcorder as follows, Getting familiar with some buttons