You can use th_s camcorder as a VCR by connecting it directly to your TV for playback. After you connect this camcorder to your TV, use the Remote Commander for convement control of the camcorder.

Use the supphed RFU adaptor to connect your camcorder to your TV. Before connechng, make sure that the TV ts turned off to prevent speaker damage. If your TV has audio/

video inputs, see page 33.

_

_IN_J

VHF

 

 

OUT

ANT

F A ' VlD'EOouT ....

 

I

 

:{FU-90UC

t RFUDC OUT

_

 

I I AUDIO OUT

c"A_e_°_'v,....o"cI

 

 

14_J,I Channel selector

3

To connect your camcorder to a TV that is already connected to a regular TV (VHF) antenna, you need to:

1Unplug the antenna cable from your TV first.

Plug in the tail end of the RFU adaptor marked OUT to the antenna input of your TV. Re-wire the antenna cable you unplugged to the RFU adaptor jack marked ANT. This

way, you can switch between TV broadcasting and your home video playback without re-wiring

2 Connect the RFU adaptor to the camcorder.

3 Connect the AC power adaptor to a wall outlet.

4Set the channel selector on the RFU adaptor (and your TV channel) to 3 CH or 4 CH of the VHF channel, whichever is not active (vacant) in your area.

5Attach the connecting plate of the AC power adaptor to the camcorder.

6Make sure the CHARGE/VTR selector on the AC power adaptor is set to VTR pos_t_on.

Note

When you want to sw_tch to a reguler TV program, set the CHARGE/VTR selector to OFF or turn off

 

the power on the camcorder

Bas,c Camera Operatron 17

Page 17
Image 17
Sony CCD-FX310 operation manual Video inputs, see, Ant