Select IBM character set Mode ASCII Decimal Hexadecimal
< ESC > “t” “1” 27 116 49 1B 14 31
Std. < ESC > “t” <l> 27 116 1 1B 74 01
Selects an IBM character set (character set #2 unless an < ESC > “7”
command has been received). Ignored in IBM mode, since the IBM
character set is selected automatically.
Select IBM character set #7 Mode ASCII Decimal Hexadecimal
Both <ESC> “7” 27 55 1B 37 -.
Selects IBM character set #l. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command. In IBM mode, character set #l is the power-up
default if DIP switch l-7 is OFF.
Select IBM character set #2 Mode ASCII Decimal Hexadecimal
Both <ESC> “6” 27 54 1B 36
Selects IBM character set #2. If the standard character set is currently
selected, this command remains dormant and takes effect at the next
< ESC > “t” 1 command, In IBM mode, character set #2 is the power-up
default if DIP switch l-7 is ON.
Select international character set Mode ASCII Decimal Hexadecimal
Std. <ESC> “R” n 27 82 n 1B 52 n
IBM <FS> “R” n 28 82 n 1C 52 n
Selects an international character set according to the value of n.
n Character set n Character set
0 U.S.A 7 Spain I
1 France 8 Japan
2 Germany 9 Norway
3 England 10 Denmark II
4 Denmark I 11 Spain II
5 Sweden 12 Latin America
6 Italy 13 Denmark/Norway
64