@Letter-quality/draft-quality
print selection
.International Character Sets
Throughout this manual, we’ll show you how to use these switches
to tailor the printer’s printing to your exact specifications. (For more
information on the positioning of the DIP switches, please see Ap-
pendix D.)
W HOW TO LOAD PAPER INTO THE PRINTER As you become acquainted with your printer, you’ll appreciate it
more and more for the conveniences it offers you-especially its
ability to accept single-sheet and form-feed paper without requiring
any external devices. Read on, and you’ll discover how to use both
kinds of paper in it.
-
-
Sing/e-sheet loading:
This printer is designed to print on standard-size stationery,
multilayer business forms, and almost any other kind of cut-sheet
paper. We’ll show you how to load paper of varying thicknesses later
in this section. For now, all you need is a standard 8 l/2-by-1 i-inch
sheet of paper.
.-
-
*If you haven’t installed the cut-sheet guide yet, please do it now.
(Please refer to Fig.l-4.)
*You can use the adjustable metal slide on the paper guide to set
your left margin. The positions are as follows:
Table.l-1 Slide positions for determining the left margin
SLIDE POSITION PRINT DISTANCE FROM
LEFT MARGIN .-
left edge
center
.64 in.
.25 in. -
-
right edge .05 in. -
When you have set the metal slide for the margin you want, you’re
ready to insert the paper.
@Turn the power switch off.
*Open the paper bail by pulling the lever toward you.
*Insert a sheet of paper straight down into the printer, turning the
platen knob clockwise (away from you). Open the cover and roll
the paper onto the platen.
@Close the paper bail by pushing the lever away from you.
*Close the cover and align the top edge of the paper with the
cutting edge of the shield. Turn the printer on.
-
_
8 -