Your computer is sending its own automatic line feed with every
carriage return (duplicating a similar intruction by the printer).
Make sure DIP switch 1-8 is in the “on” position.
l The printer prints over Itself without advancing the paper.
Check to see that DIP switch l-8 is turned off. This ensures that
an automatic line feed will be added to each carriage return-a
command that your computer does not perform by itself.
-
-
@The printer Isn’t prlntlng normal letters, characters or
symbols-only block graphic characters. (This may happen if
your computer has a ‘I-bit interface.) -
Make sure that DIP switch l-7 is turned off. (Your computer is
designed to send normal text in “words” of 7 data bits each-if
this switch is off, your printer is in its “block graphics” setting.)
l The printer won’t print block graphics-only letters, numbers
and symbols.
Be sure that DIP swich l-7 is turned on. (Your computer is de-
signed to send normal text in “words” of 8 bits each-if this switch
is off, you won’t be able to print in the block graphics mode.)
At Star Micronics, we are dedicated to bringing you the highest-
quality, most durable printer money can buy. As a result, you’ll find
that this printer will provide many years of trouble-free use. But re- -
member, if you have any questions or problems that aren’t answered
in this manual, your Star dealer is always there to help.
58