Form-feed loading: Your printer’s built-in tractor feed device is one of the most con-
venient features ever offered in a printer. It works with standard
form-feed paper as well as with laser-perforated, form-feed bond
paper- so you can produce top quality documents with a swift,
continuous feed. Here’s how it works:
*Turn off the power switch to avoid damaging the gears and raise
the hinged back cover. (If you have attached the cut-sheet guide,
you’ll need to remove it now.)
*Loosen the clamp screws and flip up the covers on each of the
tractor units.
l insert the form-feed paper through the slot beneath the back
cover of the printer; line up the tractor units with the sprocket
holes in the paper.
l Press the paper into place on the sprockets, and snap the covers
down on the tractor units. Tighten the knobs.
Figure l-10. Inserting form feed paper into the printer.
@Open the paper bail (pull the lever toward you). Set the paper
release lever in the “tractor” position (open) by pushing the lever
away from you.
*Advance the paper into printing position by turning the platen
knob clockwise. (You may want to open the front cover first, to
be sure the paper clears the cutting edge.) --
-
-.
10 -