Star Micronics SB-10 n ADJUSTING LINE SPACING

1 and 127 - just be sure that this number is greater than the value
you chose for the top margin.
Table 5-2. Setting the page length, number of lines per page,
and the top and bottom margins.
FUNCTION ESCAPE DECIMAL HEXADECIMAL
CODE CODE CODE
Page
Length
in inches -=ESC> COn 27 67 0 n lB4300n
(n = 1 to 32)
Number of
Lines Per
Page <ESC> Cn 27 67 n lB43n
(n=l to 127)
Top
Margin <ESC> rn 27 114 n lB72n
(n=l to 16)
Bottom
Margin <ESC> Nn 27 78 n lB4En
(n=l to 127)
Cancel
Top and
Bottom <ESC> 0 27 79 lB4F
Margins
n ADJUSTING LINE SPACING
Just as your word processor will set the margins, it will also set the
line spacing (or distance between lines of print) without requiring a
special command. When you turn on the printer, it will automatically
print with a line spacing of 1/6th inch, which isthe.American standard.
This means that you will get six lines to an inch, and 66 lines on an
11 -inch page.
If you wish to change the line spacing, you can do it either through
DIP switch l-3, or by sending a code. First let’s see how the line
spacing changes when you turn off DIP switch 1-3.
WHEN YOU PRINT WITH DIP SWITCH
1-3 IN THE OFF POSITION
LINE SPACING WILL SE l/$T;“%H.
WHEN YOU PRINT WITH DIP SWITCH
l-3 IN THE ON POSITION, YOUR
LINE SPACING WILL BE 1/6TH INCH.
Figure 5-1. Controlling line spacing with DIP switch l-3.
41