Star Micronics TSP400Z Series user manual Adjusting the Head Position

Fig. 5-7

9 Return the print head unit to its original position and be sure that it locks into place. (The printer cover will not close unless the print head unit is locked.)

0 Move the paper roll onto the print- er’s paper-roll holder.

A Hold the roll down and pull on the leading edge of the paper to remove any slack.

B Close the printer cover.

ENGLISH

5-2. Adjusting the Head Position

Thick paper

0.6mm Thin paper

1You can set the print head position to accommodate thick or thin paper. Change the position by moving the left-side and right-side levers for- ward or back.

2Be sure to unlock the print head before moving the levers.

Fig. 5-8

– 8 –