ENGLISH
1. Unpacking and inspection
1-1. Unpacking
Check each item in the box against Fig.
Sample paper roll
Ferrite core(s) (*1)
Printer | User’s manual | |
Fastener | ||
| ||
| (*2) |
*1 The Ferrite core is included only with printers marketed in Europe. Two are parallel interface models and one is serial interface model.
*2 A fastener is included only with printers marketed in Europe.
Fig.
1-2. Handling Notes
Before you start setting up your printer, make sure that you have a suitable place in which to locate it. By “a suitable place”, we mean:
•Close to an easily accessible
•A firm, level surface which is fairly
•Away from excessive heat (such as direct sunlight, heaters, etc).
•Away from excessive humidity.
•Away from excessive dust.
•With access to a steady power supply that is not subject to power surges. For example, do not connect the printer to the same circuit as a large, noise- producing appliance such as a refrigerator or an air conditioner.
NOTE: Make sure that the line voltage is the voltage specified on the printer’s identification plate.
– 1 –