Star Micronics TSP400Z Series Peripheral unit cable, cm or less Ferrite core, Ground wire

3-2. Peripheral unit cable

■Clamp the ferrite core onto the cable of the peripheral unit using the same procedure as you do for the parallel interface cable ferrite core. With the peripheral unit cable ferrite core, however, you have to loop the cable as shown in Fig. 3-5.

NOTE: The ferrite cores only need to be attached for the European region (only printers marketed in Europe are eligible.)

Install both the parallel interface model and the serial interface model.

ENGLISH

5 cm or less

Ferrite core

Ground wire One loop

Fig. 3-5

– 4 –