– 10 –
3-6. Loading the Roll Paper
3-6-1. Thermal Label Roll Paper (Peel Mode)
CAUTION
When using a thermal label roll paper, do not install the tension bar, two tension folders, and two
springs; otherwise, a paper jam could result.
(1) Check that dip switch 1-8 is ON (default:
thermal label roll paper). See Chapter 9 for
instructions on how to set the dip switches.
(2) Turn ON the power switch of the printer.
(3) Push the front cover downward.
(4) Open both the outer and inner printer covers.
(5) Adjust the roll paper guide to the width of
the roll paper.