– 19 –
4. Thermal Roll Paper Specification
When consumable parts have run out, use those specified below.
Note:
Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm

4-1. Thermal Label Roll Paper

• Backing paper width: 45 ± 0.5 mm to 112 ± 0.5 mm
• Paper thickness: 190 µm maximum
• Roll paper outer dimensions
Roll diameter: ø110 mm maximum roll diameter
Overall width: 45 ± 0.5 mm to 112 ± 0.5 mm
• Core inner/outer diameters: core inner diameter ø25.4 ± 1 mm/core outer diameter ø32 ± 1 mm
• Finished state of label roll paper:
Make sure the finished state of the label roll paper meets the following conditions:
1) Face the label surface of the (thermal) label paper outward of the roll.
2) Do not allow the core to protrude from the ends of the label roll paper.
3) Do not secure the tail end of the label roll paper with glue or tape. Do not fold the tail end
of the paper.
4) Do not allow the label roll paper to unravel.
5) Do not allow the label roll paper to become deformed at its outer diameter or core.