– 30 –
(6) After the lamps have flashed, turn the VR1 knob fully counterclockwise. The adjustment has
been completed if the POWER lamp is ON. Proceed to (8). The ERROR lamp may be ON
or OFF.
(7) If the POWER lamp is not ON, turn and adjust the VR1 knob to a position in which both the
ERROR and POWER lamps are ON. If the adjustment has been successful, proceed to (8).
If the adjustment has not been successful, have the printer repaired.
(8) Turn OFF the power switch and set the dip switch SW1-4 to ON.
(9) Return the dip switches SW1-5, SW1-6, and SW1-7 to their original settings.