– 1 –
1. Unpacking and Installation

1-1. Unpacking

After unpacking the unit, check that all the necessary accessories are included in the package.
Fig. 1-1 Unpacking
If anything is missing, contact the dealer where you bought the printer and ask them to supply
the missing part. Note that it is a good idea to keep the original box and all the packing materials
just in case you need to pack the printer up again and send it somewhere at a later date.
Printer
Springs
Tension shaft
Ferrite core
(for dual interface model)
Power cable
AC Adapter
CD-ROM
Setup sheets
Thermal label roll paper
Ferrite core
(for parallel interface model)
Fastener
(for parallel interface model)
Tension shaft holders
Note:When using a thermal label roll pa-
per, do not install the tension bar,
two tension folders, and two springs;
otherwise, a paper jam could result.