Star Micronics XR-1500, XR-1000 user manual Pitch Setting, Pitch Pane/ Lock

,

I

1

In addition to these indicators, there are two others, POWER and PAPER. The POWER indicator will illuminate when power is supplied to the printer, and the PAPER indicator will illuminate when no paper has been inserted.

PITCH SETTING

Use the (PIT%button to set the pitch that will be printed. Remember that the printer must be off-line for you to do this. Successive presses of this button will illuminate (and select) the following options in this order:

Pitch			Indicator(s)
10 charactexx	per	inch	locP1
12 characters	per	inch	12CPI
17 characters	per	inch	locP1, COND
20 characters	per inch		12CP1, COND
Proportional			PROP

Holding down this button will cycle continuously between these options.

Pitch Pane/ Lock

If the plyEn>button is pressed when the printer is turned on, the pitch will be “locked”, and no pitch changes can be made from software. It is still possible, however, to put the printer off-line and change the pitch using the

KCZ button.