Star Micronics XR-1000 Set/cancel, automatic line feed, Move to next horizontal tab, 1Set/clear

Set/cancel	automatic line feed		IBM
cEsc>	5	CID
1Bh	35h	Cn>
27	53	Cn>

The command above sets or cancels automatic line feed, where <n> is a binary value of either OOhor Olh. If <n>=Olh, then whenever the printer receives a <CR> (ODh), a line feed will automatically be added by the printer. If cn>=OOh,then this function will be cancelled.

L

L

Move to next horizontal tab	Both
<Hn

09h

9

The command above moves the print head to the next horizontal tab setting. There are no parameters. If there are no horizontal tabs set on the line following the current print position, this command is ignored. If underlining is on, then slopped print positions are not underlined.

1Set/clear	horizontal tabs			Both 1
<ES6	D	.. .	Cd>	<NULB
1Bh	44h	. . .	d>	OOh
! L	67	. . .	Cd>	0
27

! .

The command above sets horizontal tabs, where <nQ, and cd> are binary values representing the new tab positions. If no values are given, all tab stops are cleared. The default tab setting is every eight characters. Tabs are set at the current character pitch. If proportional spacing has been selected, then pica pitch is used for determining the positions of the tabs. In Standard mode, once the tabs have been set, the position of the tabs will remain the same if the character pitch is changed. In the IBM mode, the tab settings will change relative to the new character pitch if the character pitch is changed.

45