Star Micronics XR-1500 Line space control codes, Select superscript/subscript, Line feed, Both

Select superscript/subscript			Both
<ES0	S	<?D
1Bh	53h	Cn>
1 27	83	<n>	I

The command above will select either superscript or subscript printing, where <II> is a binary or ASCII value which may take the values OOhthrough 01h or “0” through “1”. If the value is OOhor “0”. superscript printing will be selected, and if <n>=Olh or “1”. then subscript printing will be selected.

Cancel superscript/subscript		Both
1 <ESC>	T	I
1 1Bh	54h
27	84

The command above will cancel superscript or subscript printing (if either has been

selected). Thenxuenopammeters. Ifeithersuperscriptorsubscriptprinting hasbeen selected, then printing subsequent to receipt of this command will be in the normal position.

Line space control codes

Line feed	Both
<LF>
OAh
10
The command above advances the paper one line. There are no parameters. If Auto		-
CR has been selected, a carriage return will also be generated on receipt of a Line
Feed character. l/6 inch line spacing will automatically be selected at power-on.

Reverse line feed		Both
<ESC>	CLD
1Bh	I)Ah
27	10

The command above will reverse line-feed the paper one line. There are no parameters. l/6 inch line spacing is automatically selected at power-on.

36