Star Trac IP-L5002 manual Maintenance and Service

MAINTENANCE AND SERVICE

LEVERAGE requires very little upkeep to keep your equipment performing at its best, the following guidelines are suggested.

GENERAL CLEANING

￿Wipe LEVERAGE with a light all-purpose cleaner, such as diluted Simple Green at a 30:1 solution.

￿Dry LEVERAGE with a soft cloth to prevent rust.

BEARING GREASE PACKING

￿Before bearings 731-0842 and 731-2595 installed they must be fully packed with general purpose Lithium Grade 2 grease.

Pack with grease

TIGHTENING OF THE TAPERED ROLLER BEARING ON ALL SHAFTS

To properly torque the tapper roller bearing:

￿With the tab washer NOT installed torque the bearing nut to 40-42 Lbs-Ft.(This will square and seat the bearings)

￿Back the nut off, then install the tab washer.

￿Torque the nut to 7- 9 Lbs-Ft, now bend tabs on washers to lock in place.

Page 8