Star Trac S-TBTX manual Manager / Maintenance Mode, Manager Mode

MANAGER / MAINTENANCE MODE

After using your STAR TRACS-TBTx TOTAL BODY TRAINER for a period of time, you may wish to change some of its settings.

MANAGER MODE

The Manager Settings allow you to query and modify the basic settings of your trainer. To enter Manager Settings:

1.Press and hold the , and keys together.

2.A beep will sound and “MANAGER SETTINGS” will scroll once across the PROFILE Window.

3.Release all keys. “SN” will display in the PROFILE Window; the associated numeric value for the parameter will display in the DISTANCE Window.

NOTE: The system will automatically exit Manager Settings if no key is pressed for 30 seconds.

The following keys are used to modify MANAGER SETTINGS:

Increase and Decrease Level Keys: Display the next (Increase) and previous (Decrease) parameters. Keys will repeat if held.

Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save the new value – see OK Key below.

OK Key: Updates (saves) the value of the displayed parameter in Flash memory. “UPDATING” will scroll once across the PROFILE Window while the update is in process. When the update is complete, the PROFILE Window will show the new value for the parameter.

NOTE: To exit MANAGER SETTINGS without saving any values or settings, press the QUICK START key.

NOTE: Unless otherwise specified, the Item (parameter) name is shown in the PROFILE Window, and the value of the parameter is shown in the DISTANCE Window.

The items that you may display and change with the previous keys are:

Item	Lowest	Highest	Default	Meaning
	Value	Value	Value
SN	0	9999	N/A	Serial Number. Total Body Trainer serial number (set by factory).
DSW	1.0	99.99	N/A	Display Software. Display panel software version number (set by factory).
				NOTE: Software checksum value is displayed in CALORIES Window.
OHR	0	9999	0	Operating Hours. Total operating hours.
DST	0	9999	0	Distance. Total distance traveled in miles or kilometers, based on current UNx
				setting.
UNx	UNE	UNM	UNE	Units. UNE (English) = units of pounds, miles, feet, inches
				UNM (Metric) = units of kilograms, kilometers, centimeters
				NOTE: Current Value is shown in PROFILE Window.
TIM	5	99	99	Time. Maximum time in minutes allowed for a program, excluding warm-up
				and cooldown.
WGT	1 (lb)	500 (lb)	155 (lb)	Default Weight (to user). Typical weight in lb (UNx = UNE) or kg (UNx =
	1 (kg)	226 (kg)	70 (kg)	UNM).
Lxx	N/A	N/A	LEN	Language. Display language; either LEN (English), LGE (German), LSP
26				STAR TRAC S-TBTXTOTAL BODY TRAINER OWNER’S MANUAL