5.Remove the restricted filter cartridge from the housing again. The alarm light should stay off when the process blower operates if the switch is adjusted correctly.

6.Re-install the obstructed cartridge filter. The alarm light should go on again if the switch is adjusted correctly.

7.Fine tune the switch setting so it consistently warns of a blocked filter and does not falsely indicate a blockage of a clean filter.

8.Remove the restriction from the filter element and re-install the clean filter. The alarm light should remain off.

Checking the Dewpoint Control System

The Dewpoint Switch option on dryers depends on the proper operation of the dewpoint sensor and its control board. The dewpoint sensor is in the process air stream and is therefore susceptible to contamination.

Dewpoint sensor life is dependent on:

„Air temperature and flow passing over the sensor.

„The amount of fines [dust] in the process air.

„The amount of plasticizer vapor in the process air.

The dryer operator should monitor the initial dewpoint sensor readings and establish a periodic replacement schedule as needed.

Caution! Do not attempt to check the continuity or resistance of a dewpoint sensor. The sensor will be destroyed.

If you suspect that the dewpoint readings on the dewpoint meter are incorrect, a dewpoint simulation calibrator is available from the manufacturer. This device simulates various dewpoint outputs. It can confirm proper operation of the dewpoint sensor and dewpoint system control board.

Use the following procedure to check the dewpoint sensor and dewpoint control board:

1.Remove the sensor cable from the sensor hex nut adapter.

2.Connect the cable to the plug on the rear of the simulator.

3.Turn the rotary knob on the simulator to each position and note the readings on the dewpoint meter on the dryer's control panel. The readings should correspond within a degree or two across the entire range.

4.If the readings agree, the control board is OK. Dewpoint sensor replacement is recommended. If the readings do not agree, replace the control board and run the test again to rule out the possibility of a bad sensor.

Note: Do not attempt to make any adjustments to the components on the dewpoint control board.

5. When testing is finished, re-connect the control cable to the sensor adapter.

Large Dehumidifying Dryers

Maintenance

59

Page 58 Page 60
Page 59
Image 59
Sterling 882.00295.00 specifications Checking the Dewpoint Control System
Page 58 Page 60

882.00295.00 specifications

The Sterling 882.00295.00 is a remarkable piece of engineering that seamlessly combines functionality, durability, and aesthetic appeal in a compact form. Designed for those who require reliability and performance, this model stands out in its category, incorporating advanced technologies and user-friendly features.

One of the primary characteristics of the Sterling 882.00295.00 is its robust construction. The casing is made from high-quality materials that ensure resistance to wear and tear, making it suitable for various environments, whether industrial, commercial, or residential. Its sleek design not only provides visual appeal but also enhances its usability, allowing for easy integration into any workspace or setting.

The Sterling 882.00295.00 is equipped with state-of-the-art technology that enhances its performance. It features a precision-engineered mechanism that guarantees accurate readings and efficient operation. Users can rely on its consistent performance, whether for daily tasks or specialized applications. With enhanced data processing capabilities, this device can quickly analyze and display information, making it a valuable tool for professionals.

Another significant aspect of the Sterling 882.00295.00 is its user-centric design. The interface is intuitively organized, providing a seamless experience when navigating its features. This focus on usability ensures that operators of all skill levels can easily understand and utilize the device effectively. Additionally, the model often includes customizable settings, allowing users to tailor its functionality to meet specific needs.

In terms of connectivity, the Sterling 882.00295.00 supports modern protocols, enabling easy integration with other devices and systems. This feature is vital in today's interconnected world, where data sharing and collaboration are essential. Furthermore, it typically incorporates energy-efficient technologies, aligning with sustainable practices and reducing the overall carbon footprint.

Overall, the Sterling 882.00295.00 stands out for its blend of durability, advanced technology, and user-friendly features. It is a versatile solution that meets the demands of various users, from industrial professionals to everyday operators. With its focus on precision and efficiency, the Sterling 882.00295.00 is a valuable addition to any toolkit, ensuring that tasks are completed with the highest level of accuracy and reliability. Whether used in a high-stakes environment or for everyday applications, this model exemplifies the right combination of innovation and practicality.
Top Page Image Contents