Sterling GG-75 Gas Equipment Start-Up, PRE-INSPECTIONINFORMATION With power and gas off, General

GAS EQUIPMENT

START-UP

Customer ____________________________________ Job Name & Number _________________________

PRE-INSPECTION INFORMATION

With power and gas off.

Type of Equip:	Unit Heater
Serial Number _________________________ Model Number __________________________
Name Plate Voltage:	_____________		Name Plate Amperage: _____________
Type of Gas:	Natural	LP	Tank Capacity _______ lbs.	Rating: ______ BTU @ ____ °F
			_______ kg	______ kw @ ____ °C

❐Are all panels, doors, vent caps in place?

❐ Has the unit suffered any external damage? Damage ______________________________

❐Does the gas piping and electric wiring appear to be installed in a professional manner?

❐Has the gas and electric been inspected by the local authority having jurisdiction?

❐Is the gas supply properly sized for the equipment?

❐Were the installation instructions followed when the equipment was installed?

❐Have all field installed controls been installed?

❐Do you understand all the controls on this equipment? If not, contact your wholesaler or rep.

(DO NOT START this equipment unless you fully understand the controls.)

GENERAL
With power and gas off.
❐ Make certain all packing has been removed.	❐
❐ Tighten all electrical terminals and connections.	❐
❐ Check all fans & blowers for free movement.	❐
❐ Check all controls for proper settings.	❐
	❐
	❐

GAS HEATING

With power and gas on.

Inlet gas pressure.	____	in. W.C. or ____ kPa
Burner ignition.
Manifold gas pressure. ____		in. W.C. or ____ kPa
Cycle on HIGH LIMIT.

Cycle and check all other controls not listed.

Cycle by thermostat or operating control.

Remarks: _____________________________________________

__________________________________________________

__________________________________________________

43