Manuals / Sterling / Kitchen Appliance / Food Processor

Sterling operating instructions SSK-5 4.2. Servicing the hopper loader, Maintenance

Models: SSK-5

1 33

Download 33 pages 18.56 Kb

Page 20

Image 20

SSK-5

4.2. Servicing the hopper loader

Individual hoppers can also be maintained during operation. However, Sterling recommends that you switch off the con- veying plant for all types of work on the hopper.

Switch off the hopper by means of the on/off switch (A) on the connection housing.

Wait until the conveying proce- dure has stopped.

Disassemble the vacuum line on the hopper.

Close the disassembled vacuum line so that the vacuum for the ac- tive hopper-loaders does not break down.

Depressurize the com- pressed-air line to the hopper

(only with compressed-air valve).

Disassemble the material line on the lateral inlet of the hopper.

Connection housing hopper

Remove the connecting plug (B) “conveyor control” on the connection housing of the hopper.

Disassemble the hopper.

SM3-615

Maintenance 19

Page 20

Image 20

Sterling SSK-5 4.2. Servicing the hopper loader, Wait until the conveying proce- dure has stopped, Maintenance

Contents

SM3-615 Operating Instructions Conveyor Hopper SSK-5Sterling Material Processing Parts & Service Telephone 800 Edition 07/03 SSK-5 Sterling Material Processing5200 West Clinton Ave Milwaukee, WI Telephone 414 Fax These operating instructions are forSSK-5 Parts and Service Department Sales and Contracting DepartmentTABLE OF CONTENTS 1. Safety instructions2. Installation instructions 3. Functional description 4. MaintenanceSSK-5 1. Safety instructionsSafety instructions SSK-5 1.1. Warnings and symbols Safety instructionsSafety instructions ∙ ∙ ∙ ∙ ∙ ∙SSK-5 1.2. Explanations and information Safety instructions SSK-5 1.3. For your safety1.4. For the safety of the equipment SSK-5 2. Installation instructionsInstallation instructions SSK-5 2.1. Transport Observe the safety instructions for the handling of lifting gearInstallation instructions Observe the carrying capacity of the lifting gearSSK-5 2.2. Set-up Installation instructionsConnect the unit to the plant’s supply network by means of a hose SSK-5 2.3. Compressed-air supply only with compressed-air valvesInstallation instructions The rules of the local electricity board must be observed SSK-5 2.4. Electrical connectionInstallation instructions SM3-615 Installation instructionsSSK-5 SSK-5 3. Functional descriptionFunctional description SSK-5 4. MaintenanceMaintenance SSK-5 Please observe the maintenance intervalsMaintenance Daily SSK-5 4.1. Maintenance intervalsMaintenance Wait until the conveying proce- dure has stopped SSK-5 4.2. Servicing the hopper loaderMaintenance 4.2.1. Replace the sealing rings Nonreturn valveMaintenance Open the toggle-type fasteners ARemove the tension ring B and the sealing ring on the hopper loader SSK-5 Outlet flapMaintenance Install the sealing ring and the tension ring B on the hopper loader Install the hopperMaintenance SSK-5SSK-5 4.2.2. Adjust the flap switch MaintenanceSSK-5 4.2.3. Cleaning the hopper MaintenanceSSK-5 5. Spare parts listSpare parts list SM3-615 SSK-5 26493 Hopper completeSpare parts list Order no DesignationWear Code Spare parts list6. Technical data Optional FeaturesBlow back module for automatic cleaning of the hopper loader sieve Technical data6.1 Dimension Sheet Technical dataSSK-5 SM3-615SSK-5 6.2 Control Cable Wiring Schematic Technical dataSM3-615 HOPPER FULLElectrical manual Technical dataSSK-5 Other persons are not permitted to modify or repair the equip- ment