SSK-5
Outlet flap
Remove the connecting plug “flap switch” (A) from the connection housing of the hopper.
Remove the tension ring (B) and the sealing ring on the hopper loader.
Remove the upper part of the hopper loader (C) from the lower part of the hopper loader (D).
Draw the old sealing ring (E) off the nozzle of the material outlet.
Install the new sealing ring (E).
F Observe the direction of installation (F). | |||||
|
|
|
| 180 ° |
|
A | B | C | D | E | F |
Installation sealing ring
Maintenance 21