2. Installation instructions
»These installation instructions are intended for persons with skills in electrical and mechanical areas due to their training, ex-
perience and received instructions.
Personnel using these installation instructions must be in- structed in the regulations for the prevention of accidents, the operating conditions and safety regulations and their implemen- tation.
Ensure in each case that the personnel are informed.
The installation instructions provided in the corresponding oper- ating instructions apply for all connected equipment.
Observe safety regulations with regard to lifting gear handling
All installation work must be carried out with the equipment dis- connected from electrical power and compressed air supply.
L | For installation work taking place at heights of over approx. |
| 1828.8mm (6 feet), use only ladders or similar equipment and |
| working platforms intended for this purpose. At greater |
| heights, the proper equipment for protection against falling |
| must be worn. |
| Use only suitable lifting gear which is in proper working order |
| and load suspension devices with sufficient carrying capac- |
| ity. Do not stand or work under suspended loads! |
| Use suitable workshop equipment. |
|
|
F | Install the equipment such that all parts are easily accessible; |
this facilitates maintenance and repair work. |
