Manuals / Sterling / Kitchen Appliance / Food Processor

Sterling SSK-5 2.3. Compressed-air supply only with compressed-air valves

Models: SSK-5

1 33

Download 33 pages 18.56 Kb

Page 13

Image 13

SSK-5

2.3. Compressed-air supply (only with compressed-air valves)

For operating the control valves, a compressed-air supply is necessary. Check compressed-air piping for correct installation and assembly.

Check fittings, length and quality of the hose connections for agreement with re- quirements.

The operating pressure is 5-6 bar (72.52-87.02 PSI) (system overpressure). Check the compressed-air supplied by the plant’s supply network.

Adjust compressed-air pressure to 5-6 bar (72.52-87.02 PSI) (system overpressure).

Connect the unit to the plant’s supply network by means of a hose.

Depressurize compressed-air supply lines which must be opened.

Compressed air must be dewatered, dust-free and oil-free.

Install a maintenance unit if required.

Adjust pressure to a max. value of 6 bar (87.02 PSI) (system overpressure).

SM3-615

Installation instructions 12

Page 13

Image 13

Sterling SSK-5 2.3. Compressed-air supply only with compressed-air valves, Installation instructions

Contents

Sterling Material Processing Operating Instructions Conveyor Hopper SSK-5SM3-615 SSK-5 Sterling Material Processing Parts & Service Telephone 800 Edition 07/035200 West Clinton Ave Milwaukee, WI Telephone 414 Fax These operating instructions are forSSK-5 Sales and Contracting Department Parts and Service Department1. Safety instructions TABLE OF CONTENTS2. Installation instructions 3. Functional description 4. MaintenanceSafety instructions 1. Safety instructionsSSK-5 Safety instructions SSK-5 1.1. Warnings and symbolsSSK-5 1.2. Explanations and information ∙ ∙ ∙ ∙ ∙ ∙Safety instructions 1.4. For the safety of the equipment SSK-5 1.3. For your safetySafety instructions Installation instructions 2. Installation instructionsSSK-5 Observe the safety instructions for the handling of lifting gear SSK-5 2.1. TransportInstallation instructions Observe the carrying capacity of the lifting gearInstallation instructions SSK-5 2.2. Set-upInstallation instructions SSK-5 2.3. Compressed-air supply only with compressed-air valvesConnect the unit to the plant’s supply network by means of a hose Installation instructions SSK-5 2.4. Electrical connectionThe rules of the local electricity board must be observed SSK-5 Installation instructionsSM3-615 Functional description 3. Functional descriptionSSK-5 Maintenance 4. MaintenanceSSK-5 Maintenance Please observe the maintenance intervalsSSK-5 Maintenance SSK-5 4.1. Maintenance intervalsDaily Maintenance SSK-5 4.2. Servicing the hopper loaderWait until the conveying proce- dure has stopped Nonreturn valve 4.2.1. Replace the sealing ringsMaintenance Open the toggle-type fasteners AMaintenance SSK-5 Outlet flapRemove the tension ring B and the sealing ring on the hopper loader Install the hopper Install the sealing ring and the tension ring B on the hopper loaderMaintenance SSK-5Maintenance SSK-5 4.2.2. Adjust the flap switchMaintenance SSK-5 4.2.3. Cleaning the hopperSpare parts list 5. Spare parts listSSK-5 Spare parts list SSK-5 26493 Hopper completeSM3-615 Designation Order noWear Code Spare parts listOptional Features 6. Technical dataBlow back module for automatic cleaning of the hopper loader sieve Technical dataTechnical data 6.1 Dimension SheetSSK-5 SM3-615Technical data SSK-5 6.2 Control Cable Wiring SchematicSM3-615 HOPPER FULLTechnical data Electrical manualSSK-5 Other persons are not permitted to modify or repair the equip- ment