SSPE 5
5.4. Cleaning/replacing the filter cartridges of the cleaning unit
»
Stop the conveying procedure.
Switch off the hopper by means of the on/off switch on the con- nection housing.
Switch off the conveying control by means of the main switch.
Disconnect the unit from mains supply.
Depressurize all system sections of the equipment.
F
Clean the separator hopper each time you are changing the materials.
Use only cleaning agents which fulfil the corresponding re- quirements.
Only clean the separator hopper with
&
The conveying capacity is diminished by a clogged filter car- tridge.
Maintenance 27