SSPE 5
5.3. Cleaning the hopper loader
»
Stop the conveying procedure.
Switch off the hopper by means of the on/off switch on the con- nection housing.
Switch off the conveying control by means of the main switch.
Disconnect the unit from mains supply.
Depressurize all system sections of the equipment.
Open the tension ring (A).
Remove the hopper loader lid.
Remove the cleaning unit.
Open the tension ring (B).
Remove the upper part of the hopper loader.
Clean the hopper loader by means of a vacuum cleaner.
Install the upper part of the hopper loader. Close the tension ring (B).
Mount the cleaning unit.
Mount the hopper loader lid.
Close the tension ring (A).
Install the hopper.
B
SSPE 5
Maintenance 26
