Entering Values Into Controller Fields
When it is necessary to change the settings for a particular feature, you will need to do the following:
1.Use the arrow keys to select the value.
2.Select the value in the field to be changed by pressing the SET key.
3.Press the numbers you want to enter into the field from the numeric keypad (Shown below).
4.Press the green ENT (Enter) key to enter those values or the red ESC (Escape) key to return the values back to their original setting.
5.Use the arrow keys to scroll up or down to set the values in the next or previous field.
Note: Values entered into the fields must be set into the controller using the ENT key before moving on to the next field or data will be lost.
Figure 7: Controller Keypad
1 | Chapter 3: Installation | 20 of 38 |
