Stewart Filmscreen Corp C Installing the high voltage switch control standard

Installing the high voltage switch control (standard)

A standard 3-position 120V wall switch is supplied. The high-voltage control is connected to the electrical source. It alternates directions of screen motion by means of the hot lead, using the 3-position switch.

Preparing the connection

Before making the electrical connections, you need:

‹An available 120V AC constant power source

‹A 4-conductor romex or motor connector cable

Making the connections

The diagram in Figure 7 illustrates the connections.

1.Connect the wall switch to the 120V AC constant power source.

2.Connect the wall switch to the screen unit’s electrical box. To do this, you need to remove the end plate and connect your connector cable.

DOWN-Black

	Yellow
UP-Red
Line (Hot)
		120V AC Power
COMMON-White Neutral		Source	Screen Switch
GROUND-Green

Figure 7: High voltage control wiring diagram

Luxus A/SR-1 Electriscreen: Owner’s Manual 9