Stewart Filmscreen Corp C Installing the screen trigger interface option, Making the connection

Installing the screen trigger interface option

The optional 12V screen trigger interface enables up and down operation of the screen in conjunction with a projector, tuner, VCR, cable box, or switched AC outlet.

Once the AC power outlet is installed near the screen, an electrician is not needed to connect the screen trigger interface to the power source.

Note: An optional 12V DC transformer is used if there is no 12V power source from the projector or AV control center.

Preparing the connection

Before making the electrical connections, you need:

‹An available 120V AC constant power source installed near the screen

Making the connection

The electrical diagram in Figure 8 illustrates the connection. 1. Plug the AC power cord into the AC outlet.

2.Attach the 12V trigger wire to the jack on the back side of the case adjacent to the power cord.

3. Use the supplied quarter-inch mono phone plugs to terminate the 12V trigger wire.

	To Projector
Optional 12V DC	or
Transformer	120V AC 60 Hz
With Switch	Power Source

120V AC Power Source

Figure 8: Screen trigger interface connection

10 Stewart Filmscreen Corporation