Installing the wireless remote control option

The optional Stewart Filmscreen wireless remote control allows control of the screens from anywhere in the room.

Once the AC power outlet is installed near the screen, an electrician is not needed to connect the wireless remote receiver module to the power source.

Note: The distance between the hand-held remote control and the receiver can be up to 50 feet. It is not necessary to have uninterrupted line-of-sight between the remote and the receiver, but there should be no metal objects between them. The override switch on the bottom of the receiver can be used instead of the remote control.

Preparing the connection

Before making the electrical connections, you need:

‹An available 120V AC power source installed near the screen

Making the connection

The electrical diagram in Figure 10 illustrates the connections. 1. Connect the 4-pin connector to the receiver module.

2.Plug the receiver module into the 120V constant AC power source.

4-pin Connector

120V AC Plug

Wireless Remote

Wireless RemoteControl

Receiver Module

Override Switch

Figure 10: Wireless remote control connection

12

Stewart Filmscreen Corporation

Page 14
Image 14
Stewart Filmscreen Corp C installation instructions Installing the wireless remote control option